RI: 401-438-1500  FL: 407-248-1142  CA: 213-612-0622

LaserStar

Rotary Dial Laser Marking Workstation

3806 Series
FiberStar Rotary Dial Laser Marking Workstation

The FiberStar Rotary Dial Laser Marking Workstation is a robust, turnkey industrial laser marking platform that offers the benefits of a non-contact, abrasion-resistant, permanent laser mark, laser engraving, or cut onto almost any type of material. These systems offer the speed, reliability and flexibility required to meet stringent quality control and process certification standards.

 

FiberStar Laser Marking Systems integrate the FiberStar laser marking source and provide controllable pulse rates that can be adjusted from continuous wave to single pulse for deep laser marking, cutting, or fast throughput thermal mark applications at up to 200 characters per second.

The FiberStar Rotary Dial Laser Marking System is a high volume production workstation that is ideal for a wide range of applications. The system is designed to allow an operator to rapidly load/unload components, “quick release” load/unload of preloaded fixtures, or single component marking in the manual mode. Advanced integrated motion for step-and-repeat laser marking, or coordinated rotary motion for seamlessly laser marking around a circumference is also possible.  Operators can trigger the cycle using the dual trigger switches or a foot pedal.  A safety light curtain option is also available.  LaserStar’s laser marking operating software provides complete coordination of all integrated system components.

Rotary Dial Laser Marking WorkstationAs a turnkey solution provider, LaserStar’s Applications Specialists will evaluate your laser marking or laser engraving requirements, define the application goals and objectives, specify and verify the correct laser marking platform, and define a complete laser marking system configuration to accomplish the desired results.

  • Solar & Semiconductor
  • Bio Sensor Production
  • Thin Film Polymers
  • General Marking & Engraving Automotive (Parts and Displays)
  • ID Cards & Mobile Phones
  • Jewelry Laser Engraving & Cutting
  • Medical Devices & Implants
  • Electronics & Sensors/Instruments Industrial Components
  • Manufacture of Processed Parts

 

  • Technical Specifications
 
Laser Source  
Laser Type Pulse Fiber Laser
Platform Rotary Dial Workstation
Pulse Frequency 1 - 500 kHz (Model Dependent)
Output Power 10-100 Watts
Cooling System Fully air cooled, heat-sink
Marking Field Up to 12" x 12"
Focusing Optics 100, 160, 254, 330, 420
Focal Distance Focal distance & RAL
Z-Axis Mechanical or Motorized
Electrical Connection 110 - 230 V (± 10%) 16 A, 50/60 Hz
Weight approx. 2000 lbs / 907 kg
Warranty Coverage (Parts & Labor) As Quoted
Laser Safety Compliance FDA(CDRH), UL, CSA, CE
Additional F-Theta Flat Field Lenses available upon request.  Additional Focal Length Lenses available upon request. 
Note:  In the interest of technical progress, we reserve the right to make technical changes without notice.