FL: 407-248-1142  RI: 401-438-1500  CA: 213-612-0622


Jewelry Laser Welding: Repairing a Class Ring

Tips for Repairing a Class Ring Using Laser Welding

The 10K Harvard class ring was thin and broken at the bottom of the shank. To repair the ring, the thinning area of the shank was first cut away and then re-shaped and sized on a ring mandrel.

An insert was then tacked in place on both sides and laser "stitched" using the Keyhole Weld and Overlapping Weld techniques. 10K Yellow Gold filler wire was then added. The ring was then cleaned by filing, grinding, rubber wheeling and finally a lap and polish.

Please note the Harvard class ring after laser welding and finishing.

Florida (Headquarters, Manufacturing, Sales & Training)
2461 Orlando Central Parkway, Orlando, FL 32809 USA
California (Sales & Training Center)
20 East Foothill Boulevard, Suite 128, Arcadia, CA 91006 USA
Rhode Island (Sales & Training Center)
100 Jefferson Boulevard, Suite 315, Warwick, RI 02888 USA

Made in USA
© 2024 LaserStar Technologies Corporation. All rights reserved.