Laser Marking & Engraving Systems
FiberCube Laser Marking & Engraving Systems
The FiberCube® 3800 Series robust design is an excellent solution for both short and long run production cycles. A variety of rotary and multi-axis motion devices are available to meet the widest range of applications.
High precision markings are achievable on almost any type of material including gold, platinum, silver, brass, stainless steel, carbide, copper, titanium and aluminum, as well as a wide variety of medical-grade alloys and plastics. These laser engraving systems offer the speed, reliability and flexibility required to meet stringent quality control and process certification standards.
FiberCube® Engraving Systems integrate the FiberStar laser marking source and provide controllable pulse rates that can be adjusted from continuous wave to single pulse for laser marking, deep laser engraving and cutting, or fast throughput thermal mark applications at up to 200 characters per second.
FiberCube® Engraving Systems are ideal for a wide range of applications including flat surfaces, advanced integrated XYZ motion for step-and-repeat laser marking, or coordinated rotary motion for seamlessly laser marking around a circumference. LaserStar’s operating software provides complete coordination of all integrated systems.
As a turnkey solution provider, LaserStar’s Applications Specialists will evaluate your laser marking or engraving requirements, define the application goals and objectives, specify and verify the correct marking platform, and define a complete laser system configuration to accomplish the desired results.
- Solar & Semiconductor
- Bio Sensor Production
- Thin Film Polymers
- General Marking & Engraving Automotive (Parts and Displays)
- ID Cards & Mobile Phones
- Jewelry Laser Engraving & Cutting
- Medical Devices & Implants
- Electronics & Sensors/Instruments Industrial Components
- Manufacture of Processed Parts
| Laser Type || Pulse Fiber Laser (MOPA Engines) |
|Platform ||Safety Enclosure with Integrated Stand |
| Wavelength || 1064 nm (Nominal) |
| Pulse Frequency ||Up to 2000 kHz |
| Laser Peak Power || >10 kW |
| Output Power ||30 - 80 Watts |
| Cooling System || Fully air cooled, heat-sink |
| Marking Field Size || Variable |
| Focusing Optics || 100, 163, 2541 |
| Profile Laser || Visible, red-beam pilot laser for easy positioning of the work piece |
| Z-Axis || Motorized |
| Electrical Connection || 110 - 230 V (± 10%) 16 A, 50 / 60 Hz |
|Dimensions ||29.7” L x 19.7” W x 93” H |
753 mm x 500 mm x 2354 mm
|Approx. Weight ||220 lbs / 100 kg |
| Warranty Coverage |
(Parts & Labor)
| As Quoted |
| Laser Safety Compliance || FDA(CDRH), CSA, CE |
| Country of Origin ||Designed, Engineered, and Built in America |
1Additional F-Theta Flat Field Lenses available upon request.
Note: In the interest of technical progress, we reserve the right to make technical changes without notice.